|
|
1019-N
Price: $347.00
[Add to Wishlist]
|
| Housing: Natural cast bronze. Removable roof for easy relamping.
Fasteners are 300 series stainless steel. Molded silicone gasket seals glass,
top and bottom, and prevents moisture intrusion into the fixture. NOTE: The
base has two (2) ½" NPT conduit entrances for connection to the power source.
|
| Finish: Natural Bronze (N) is as-cast, will age over time.
|
| Optical Assembly: Clear borosilicate glass refractor lens. Fully
gasketed top and bottom. |
| Lamping: 13W CFL (GX23D-2). 75W MV medium base E17 lamp. 100W
maximum A19 lamp. |
| Ballast: All HID ballasts are core and coil and regulated with power
factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation
with +/- 10% input voltage regulation. Ballasts are factory pre-wired and
tested. Metal halide ballasts are capable of starting at -20° F or -30° C and
HPS at -40°F or -40°C. Fluorescent ballast is core and coil, NPF Class B.
Fluorescent ballast is capable of starting at 0° F or -18° C. Ballast is factory
wired and tested. |
| Installation & Mounting: VOLTAGE CAUTION: Some local
interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtures
when they are mounted below 8'. Check with local authorities before specifying
alternate voltages. Lower housing may be recessed directly in the ground or in
concrete. Beacons are partially recessed. Potting compound must be used to seal
the conduit wire entry. |
| Warranty: Lifetime limited warranty. |
| Certification: UL Listed to U.S. safety standards for wet
locations. cUL Listed to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards. |
| Height: 9 1/32" (229mm) |
| Width: 8 3/8" (213mm) |
| Max. Weight: 11.01 lb. |
|